Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in Edmond?
Duct repair and sealing in Edmond typically costs $350 to $1,800 for most homes, with simple leak sealing at the low end and partial duct replacement at the high end. A single disconnected joint or crushed flex run usually lands between $250 and $550, while larger repairs that involve re-insulating attic runs or replacing sections of rigid ductwork run from $800 to $2,500. The written estimate sets the final price, and estimates are free.
Those ranges are what we see across Edmond’s housing stock, from the mid-century homes near downtown to the newer builds out toward Covell Road. What pushes a job toward the top of a range usually isn’t labor. It’s what we find once the system is opened up: crushed flex, disconnected trunks, torn vapor barrier in a hot attic, and joints that were never sealed in the first place. We repair what we find, because there’s no point cleaning a system that’s still leaking conditioned air into the attic.
Key Takeaways
- Most Edmond duct repair and sealing jobs fall between $350 and $1,800.
- Sealing leaks and disconnected joints costs less than replacing crushed or collapsed duct runs.
- Attic heat and humidity in central Oklahoma punish tape, mastic, and insulation; properly sealed systems last longer.
- We inspect, clean, and repair in a single visit, using Rotobrush mechanical agitation and Nikro HEPA extraction rather than blow-and-go equipment.
- Free estimates, licensed and insured, with technicians who have up to 13 years of experience.
Duct Repair & Sealing Cost Breakdown (2026)
The table below shows typical line-item ranges for the Edmond market. Your written estimate will reflect the specific condition of your system, the number of leaks, and how accessible the ductwork is.
| Service | Typical Range | What It Covers |
|---|---|---|
| Leak sealing (mastic + tape, accessible joints) | $350 – $700 | Sealing visible joints, boots, and plenum connections with code-approved mastic and foil tape |
| Single disconnected or crushed run repair | $250 – $550 | Reconnecting a joint, replacing a short section of flex, re-supporting sagging duct |
| Partial duct replacement (rigid or flex) | $800 – $1,800 | Replacing damaged sections of trunk or branch duct, including insulation and sealing |
| Full attic duct repair and re-seal | $1,500 – $2,500 | Comprehensive repair across the attic system, vapor barrier work, full joint sealing |
| Duct cleaning before or after repair | $400 – $900 | Rotobrush agitation and Nikro HEPA extraction; recommended when repairs expose debris |
| Dryer vent cleaning (add-on) | $150 – $275 | Full vent pathway cleaning, lint removal, safety check |
| Honeywell or Aprilaire air quality system service | Estimate-based | Filter, filtration, and purification system service; priced after inspection |
Lead-in costs sit at the bottom of each range for a single accessible joint or a short branch. Costs climb when the ductwork is buried under blown insulation, when the attic is cramped, or when multiple runs have to be replaced rather than reconnected. A system with significant crushed flex and disconnected boots will take more time and material than one with a handful of leaking seams. Neither is unusual in Edmond – the combination of intense summer attic heat and years of expansion and contraction works tape loose over time.
What Affects Duct Repair & Sealing Pricing in Edmond
- Number of leaks and joints. A handful of leaking seams is quick work. A system with disconnected boots at every register, a torn trunk, and a crushed return takes considerably longer and more material.
- Duct material and condition. Older Edmond homes often have rigid metal ducting with unsealed seams; newer homes tend toward flex with sagging runs. Each repair differently, and flex replacement costs less per foot than fabricated metal.
- Attic access and layout. A low-pitch attic or a crawlspace with tight clearances slows everything down. Access matters as much as the repair itself when estimating.
- System size. A larger home with multiple zones and longer trunk runs has more joints and boots to inspect, seal, and potentially repair.
- Contamination found during inspection. When repair exposes debris, dust, or debris left by a renovation, cleaning with Rotobrush and Nikro HEPA extraction belongs in the same visit, which affects the total estimate.
- Whether the system needs an air quality upgrade. We’re authorized to install and service Honeywell and Aprilaire filtration and purification systems, and some homes benefit from added filtration after repair. Priced separately.
Edmond’s climate plays a real role. Summer attic temperatures accelerate the breakdown of tape and thin flex insulation, and the temperature swing between a 100-degree attic and a 74-degree living space stresses every joint. Ductwork that was sealed years ago with basic cloth tape often needs re-sealing today. That’s normal wear in this part of Oklahoma, not a sign anyone did a bad job.
Why the Repair Matters More Than the Cleaning Alone
A common scenario we encounter: a homeowner books a cleaning, and during inspection the technician finds a disconnected return or a crushed trunk line. That’s a situation where cleaning alone doesn’t fix the problem. You can agitate and extract every ounce of dust from the system, and the system will still pull attic air into the living space through the gaps.
This is why we offer duct cleaning in Edmond and duct repair as one service. We diagnose, clean, and repair in a single contractor relationship. Professional IAQ-grade equipment is the anchor. Rotobrush’s rotary brush system mechanically dislodges buildup instead of relying on air pressure alone. Nikro HEPA extraction captures the dislodged debris at the source. Abatement Technologies containment tools maintain negative pressure during the work so contaminants don’t recirculate. When repairs happen, that same equipment protects the home during the job.
When the inspection wraps up, you get a straight conversation about what’s leaking, what’s crushed, and what needs to be replaced. No upsell, no shop-vac shortcuts. Just the work the system actually needs.
How to Save on Duct Repair & Sealing in Edmond
A few practical ways to keep the total reasonable without cutting corners on the work itself.
- Bundle cleaning with repair. When a system needs both, doing them in one visit usually lowers total cost compared to two separate appointments. Cleaning after repair also makes the sealing work easier to verify.
- Address leaks early. A single disconnected joint is usually a smaller repair than a crushed run that’s been pulling attic air for a season. Catching it early saves material and time.
- Ask for a written estimate before work begins. The estimate is free, and it protects you from surprise charges. Ours sets the final price.
- Add dryer vent cleaning to the same visit. Clogged dryer vents are a fire risk, not just a maintenance item. NFPA data links them to thousands of residential fires annually. Getting it done on the same trip keeps overhead down.
- Skip the coupon-company shortcut. A cheap service that leaves leaks in place isn’t saving you money. The system will still lose conditioned air to the attic and every repair downstream costs more.
If you’re unsure whether your system needs repair or just cleaning, call and we’ll talk it through. Free estimates, upfront pricing, and a written scope of work before anyone touches your ductwork. Call (844) 461-1541.
What Happens When You Call
Here’s how a typical visit plays out. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday.
When a technician arrives, the first step is a visual inspection of accessible ductwork: attic runs, return trunks, register boots, and the plenum at the air handler. We’re looking for disconnected joints, crushed flex, torn insulation, and sagging runs. Anything accessible gets checked. Then we’ll explain what we find and hand you a written estimate with line items and a range for the work. That estimate sets the final price.
If you want the work done, it’s usually scheduled quickly, and in many cases we can clean and repair on the same visit. If you have more than one system, we’ll walk both.
Frequently Asked: Duct Repair vs. Replacement
Is it cheaper to repair ducts or replace them? Repair is almost always cheaper than full replacement, and full duct replacement is rarely necessary. Most Edmond homes we see need targeted repairs: reconnecting joints, replacing crushed sections, and re-sealing seams. That kind of work typically runs $350 to $1,800, versus a full system replacement that runs significantly higher. The written estimate from an on-site inspection is the only way to know for sure what your system needs.
Can duct leaks really affect my energy bill that much? Leaking ductwork sends conditioned air into the attic instead of the living space, so your system works harder to hold temperature. Sealing the leaks typically makes a measurable difference, though how much depends on the size of the leaks and the condition of the system. We don’t promise a specific percentage – just the correct repair.
FAQs – Duct Repair & Sealing Cost in Edmond
How much does duct repair cost in Edmond?
Duct repair in Edmond typically costs $250 to $1,800, depending on the number of joints, the condition of the duct material, and attic access. Most single-joint repairs run $250 to $550, while partial replacements and fuller attic repairs land in the $800 to $2,500 range. Call (844) 461-1541 for an exact quote – estimates are free.
How much does duct sealing cost in Edmond?
Duct sealing in Edmond usually costs $350 to $700 for accessible joints, boots, and plenum connections. A full attic re-seal on a larger system can run higher. Proper sealing uses mastic and foil tape rated for ductwork, not cloth tape. Call (844) 461-1541 – estimates are free.
How much does duct cleaning cost in Edmond?
Duct cleaning in Edmond typically costs $400 to $900 depending on system size and how much debris the inspection turns up. When cleaning is bundled with repair in a single visit, total cost is usually lower than booking them separately. Call (844) 461-1541 for an exact quote.
Can you clean and repair the ducts in the same visit?
Yes. In most cases we can inspect, clean, and repair during the same appointment. If we find a repair that requires special material or additional time, we’ll schedule a return visit and tell you upfront what it will involve. We answer 24/7 – call (844) 461-1541 to book.
Do you also clean dryer vents?
Yes. Dryer vent cleaning typically runs $150 to $275 and can be added to a duct repair or cleaning visit. Clogged dryer vents are a fire hazard, not just a maintenance item, and NFPA data links them to thousands of residential fires annually. Call (844) 461-1541 to add it to your visit – estimates are free.
Should I repair ducts before or after cleaning?
Clean first, then seal and repair in the same visit whenever possible. Cleaning after repairs risks dislodging fresh mastic and foil tape, and cleaning first ensures the system is clean before it’s sealed against leaks. We sequence the work in the right order so both hold up. Call (844) 461-1541 for a free estimate.
Is duct repair worth it in an older Edmond home?
Usually, yes. Older Edmond homes tend to have rigid metal ducting with seams and joints that have worked loose over decades of summer heat and winter cold. Re-sealing those joints and repairing any crushed runs typically restores system performance, and the cost is a fraction of what full replacement would run. We walk older systems carefully before recommending a price. Call (844) 461-1541.
Book a Free Duct Repair Estimate in Edmond
If you’ve noticed uneven room temperatures, dusty air after the system runs, or a big jump in your cooling bill this summer, your duct system is worth a look. Duct Cleaning Edmond offers free estimates on duct repair and sealing, with a written scope of work and upfront pricing before any work begins. We’re licensed and insured, and our technicians have up to 13 years of experience. We use professional-grade equipment on every job: Rotobrush mechanical agitation, Nikro HEPA extraction, Abatement Technologies containment, and Honeywell and Aprilaire air quality systems. We also handle dryer vent cleaning so you have one contractor for the systems that matter.
Call (844) 461-1541. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. For a look at how we handle the cleaning side, see our Edmond service page.
Pricing reflects the Edmond market as of 2026. Duct Cleaning Edmond offers free estimates – call (844) 461-1541.
What Our Customers Say
"Two guys, about three hours, plastic down at every register, and they wiped the vent covers before putting them back."
- Marcy Schaefer"Fair price and thorough work. They ran about an hour and a half past the estimated finish time, so don't schedule anything tight after."
- Maya Rao"My wife's allergies had been bad in this house since we moved in. It's been two months since they did the ducts and it's noticeably better. Not a miracle, but real."
- Nathan Meyer